Home | External Models | Internal Models | Automatic Models | Reps | Video Clips | About Us | FAQ's | Contact Us | Site Map | Contract Assembly | News

ASP-3 O-Ring Installation Machine

Features

  • Benchtop mounted machine
  • Cycle rates up to 30 time per minute (1,800 per hour)
  • Digital and resetable counter
  • Right-hand or left-hand configuration
  • Simple tooling head change
  • Adaptable for use with horizontal or vertical applications
  • Accommodates o-rings/seals ranging from 2.0” to 3.0” outside diameter

Applications

  • O-Rings
  • Quad Seals
  • Back-up Rings
  • Split Seals
  • Cup Rings
  • Teflon Seals

Machine Specifications

  • 115 Vac, 60 Hz. (other voltages available upon request)
  • 90 psi (6.205 bar) air supplyASP-3

Options

  • Low Lube Reservoir Sensor - Shuts down the ASP-1 when the lubricant reservoir needs refilling. Click here for the spec sheet. 
  • O-Ring Detection - A sensor checks for the presence of an O-ring on the mandrel with each cycle of the machine. If an O-ring is not present, a warning light will be turned on and the machine will shut down. Click here for the spec sheet.
  • O.D. Lubricator - Applies lubrication to the outside diameter of the O-ring. Click here for the spec sheet. 
  • Stainless Steel - Available for "clean room" applications.
  • I-Beaming and Extreme Clearance - Handles some degree of additional warping. Click here for the spec sheet.

Standard ASP-3 Dimensions

  • Click here for the spec sheet.

 


Automated Industrial Systems - 4238 West 12th Street. Erie, PA 16505